1 5

Blue Spark Creations

The Mini

The Mini

$1,740.00 USD
$1,740.00 USD
Sale Sold out
Tax included.

The machine does NOT include the shell clamps.

The Mini is the fastest and smallest shell pasting machine on the market.

It is a 2 axis automatic shell pasting machine capable of pasting shells ranging from 1" (25mm) to 4" (100mm).

It is very light weight and compact, making it easy to transport and perfect for small workspaces.

It is capable of running at very high speeds (4" shell, 3 layers in less than 20 seconds).

No external laptop is required as the software comes pre-installed in the built computer chip.

The machine comes with the control pannel with a built in 36v 5A power supply, a set of tooling and 3 rolls of 2mm, 5mm and 8mm masking tape.

To maximize safety during operation, the following design implementations have been followed :

- The machine is grounded to earth to prevent static buildup.

- The motors are sealed brushless steppers.

- All electronics are housed inside a plastic enclosure.

- The control pannel is connected to the machine through 3ft (1m) long power cable.

 

The machine comes pre-built, tested and ready to go!

 

Specs :

Compatible shell sizes : 1.25", 1.75", 2", 2.5", 3", 4" (30mm, 40mm, 50mm, 63mm, 75mm, 100mm)

Ribbon type : masking tape

Compatible tape width : 0.12" - 0.47" ( 3mm - 12 mm )

Dimensions :  13x13x10 inches ( 33x32x26 cm )

Weight : 13 lbs ( 6kg )

Max pasting speed : 240 RPM

Power requirements : 110 - 240v AC


View full details

Customer Reviews

Based on 3 reviews
33%
(1)
0%
(0)
0%
(0)
67%
(2)
0%
(0)
s
steve

Design is good but the follow through on fabrication is terrible. Out of square striped thread holes. Owner sent me a hand scribbled paper detailing how to cut apart and reweld. Shell holders poorly made and out of square.

s
steve kursinsky
2 stars at best

Machine has hope but the follow through on fabrication was terrible.
Customer service skills also lacked at best. Machine came in missing parts missing part of the order. He did address those things but the stripped out threads and the out of square shell holders he did not . He did send me a scribbled diagram of how to cut it apart and reweld it.
I withheld this review to see if others came in like this. Another Ring that just came in to a friend and had similar issues with poor fabrication

J
Jim Favier
Tape it up.

So far things are working great, had minor problems with lose wire (power cord). my three-inch shell worked fine. The four-inch shell gave me a little trouble, fitting between the four-inch tooling. I believe the upper tube needs to be just a little shorter 1/8 of a inch would work beautifully. Made my 1/4 inch time fuse stick out about a 1/4 inch from the bottom of the shell.